Jasco RM24993 Manuel d'utilisateur télécharger pdf (Page 11)

Volume/Mute Control and Punch-

Through

This remote lets you select which device Mode

controls your Volume/Mute buttons. The remote is

initially set for all device Modes to use their own

Volume/Mute control if present. If the programmed

code has no Volume/Mute operation of its own

then those buttons will punch-through control to

the TV Mode device without needing to change to

TV Mode.

Setting ALL Volume/Mute Control to

any one Mode

This routine can set all Modes to “punch-through”

to any one chosen Mode for Volume/Mute button

control without the needing to change to that

Mode.

Using Your Remote, cont.

1. Press and hold the SETUP button until

the red indicator turns on, then release

the button.

2. Press and hold the MUTE button until

the red indicator blinks off, then release

the button.

3. Press and release the desired Mode button

(TV, VCR, etc.) for Volume/Mute control,

the red indicator blinks then stays on.

4. Press and release the MUTE button

and the red indicator turns off. The

red indicator will blink rapidly for

three seconds if the Mode you have

selected has no Volume/Mute control.

All other Modes will now punch-through to your

chosen Mode for Volume/Mute control.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Jasco RM24993 Manuel d'utilisateur Page 11